Direct Bank Transfer

Direct Bank Transfer is our preferred method of payment. Once an order has been finalised, we will email you an order number with payment instructions.

Credit Card Payment

We accept Visa, Mastercard and platinum cards.

Supplied as a kit with assembly instructions. Assembly may take between 15 and 60 minutes depending on selected options.

- The standard finish is a clear anodized grey frame and grey lifting columns.

- Frames are also available in white or black powder coated finish with matching white or black lifting columns. Frames are powder coated post frame fabrication and incur an additional charge.

- 603mm to 1263mm (without adjustable feet).

- Rock solid frame made from an aluminium anodized extrusion (also available in white or black powder coated finish).

- Six Laminex 25mm surface finishes to choose from.

- Electric height adjustment at the touch of a button.

- Lifting system made by Danish based global leader.

- 3 x DL12 lifting columns for adjusting the work surface height.

- DL12 lifting columns feature the PIEZO hardware based anti-collision technology. This feature prevents material damage to a desk if a collision with a solid object occurs. The PIEZO sensor is integrated in the legs with no visible changes and no extra mounting.

- Thrust up to 700 N (per lifting column).

- Raises and lowers at maximum speed of 38 mm/s.

- Control boxes use ZERO technology to lower standby power consumption to just 0.1W.

- Two lifting column positions allow for improved stability and weight distribution.

- Optional straight or curved feature panels available in six Laminex 25mm surface finishes.

- Optional speaker shelves available in six Laminex 25mm surface finishes.

- Optional storage shelf mounted at the rear and underneath the work surface. Available in six Laminex 25mm surface finishes (matching either benchtop or feature panels).

- Optional custom width recess for mixers or other equipment.

- Please advise required cut-out width when placing an order.

- Includes flat recessed surface. Recessed surface is 25mm below the work surface (benchtop).

- Recessed surface is available in six Laminex 25mm surface finishes (matching either benchtop or feature panels).

- Optional front padded leather surface with radiused front edge.

- Upholstered in-house using quality genuine leather black cowhides.

- Underside is upholstered using black vinyl.




Front leather padded surface example in a studio


Front leather padded surface example in a studio

- Optional custom keyboard/midi controller cut-out and 80mm wide platforms for the keyboard to sit on.

- Please advise size of keyboard (width x depth x height) and pitch (distance) between keyboard feet in millimetres when placing an order. The pitch between the two keyboard 80mm wide platforms is customized to fit a specific keyboard/midi controller.

- Optional custom keyboard/midi controller cut-out and 80mm wide platforms for the keyboard/midi controller to sit on, in addition to a 250mm deep pull out shelf for a computer keyboard and mouse.

- The width of the pull out drawer is equal to the width between the two platforms (minus drawer runner system).

- Optional front and/or rear acoustic privacy panels.

- Lightweight and semi-rigid panels with excellent sound absorbing properties.

- Ideal for height adjustable consoles to reduce weight load on the lifting column motors.

- Acoustic privacy panels are vailable in 9 colour options.

- Front acoustic privacy panel is 9mm thick.

- Rear acoustic privacy panel is 18mm thick.

- Optional lifting column carcasses available in six Laminex 25mm surface finishes.

- Optional 19 inch 8RU rack mounts.

- Available for left hand side and/or right hand side.

- 2 x cable entry holes at rear of work surface with 60mm white or black cable covers for neatly routing cables from the work surface to the underside. Supplied free of charge (please select during ordering process).

- Optional white or black umbilical with anchor for safely running data and power cables from floor to work surface.

Umbilical cable management.

- Optional wire grids (cable baskets) to ensure neat cable management. A 650mm wide or 950mm wire grid can be fastened where required to the underside of the benchtop to help ensure neat cable management (pilot holes not included).

- Optional computer holders which can be mounted to underside at the rear of the console or near the front edge.

Jaw Technical Specifications - Height range:290-510mm - Width range:90- 240mm - CPU max weight: 25kg - Net product weight: 1.6kg - Colours: Silver - Fixings: mount and rotate OR mount and rotate with 350mm slide

Loop Technical Specifications - Height range:240-500mm - Width range:80-225mm - CPU max weight: 20kg - Net product weight: 0.9kg - Colours: Black - Fixings: mount and rotate OR mount and rotate with 350mm slide

- Optional Indesk modules supplied with 1000mm power lead (3-pin plug). Longer power leads available upon request. Please advise preferred location of module when placing an order eg. front left or rear right of studio console.

- Optional power rails which can be mounted to the underside of the work surface.

Serveredge 6GPO PDU - Wide range of output ports: (6) 3 Pin AUS GPO - 100mm recessed brackets included for mounting to underside of a work surface - Single input 3 Pin Aus Plug / 2m cable / 10A / 240V - Power Indicator Light - Maximum Depth : 44.6mm (optional 100mm recessed brackets included) - Maximum Height : 45mm - Maximum Width : 482.6mm - 2 year warranty

Serveredge 8GPO PDU - Wide range of output ports: (8) 3 Pin AUS GPO - 100mm recessed brackets included for mounting to underside of a work surface - Single input 3 Pin Aus Plug / 2m cable / 10A / 240V - Power Indicator Light - Maximum Depth : 44.6mm (optional 100mm recessed brackets included) - Maximum Height : 45mm - Maximum Width : 482.6mm - 2 year warranty

PR10V Power Rail - Wide range of output ports: (10) 3 Pin AUS GPO - angle brackets included for mounting to underside of work surface - vertical positioning of outlets - 2 meter chord - overload protection with reset button - L x W x T (MM): 650 x 62 x 43 - 1 year warranty

PR10H Power Rail - Wide range of output ports: (10) 3 Pin AUS GPO - angle brackets included for mounting to underside of work surface - vertical positioning of outlets - 2 meter chord - overload protection with reset button - rack mount - L x W x T (MM): 483 x 90 x 70 (122mm including mounting arm) - 1 year warranty

- Connect your LINAK Desk Panel DPG1M or DPG1C control panel with your iOS or Android mobile device, or to your desktop PC. Auto-connect, receive motivational notifications, and have statistics with overview to help utilise the office desk’s adjustment function more actively – and ultimately improve work habits. Available for iOS and Android devices. It can be downloaded in App Store, Google Play or from Microsoft.



NOT INCLUDED WITH DPF1M OR DPF1C CONTROL PANELS

The Bluetooth® Adapter is required to use the Desk Control App when using a DPF1M or DPF1C control panel. The Bluetooth® Adapter and the Desk Control App (free download) enable your phone or tablet to adjust your desk. Simply plug the Bluetooth Adapter into the DESKLINE control box and download the Linak Desk Control App.

Available for iOS and Android devices. It can be downloaded in App Store, Google Play or from Microsoft.

- Up and down drive
- Displays actual height
- Easy support - displays error codes and links to LINAK website
- 2 memory positions
- Possibility to enable automatic drive on memory positions
- Works via Bluetooth Low Energy Technology

- Optional LINAK Desk Sensor™ 1 (DS1) which is an Anti-Collision™ solution that can limit material damage to a console or an object if a collision occurs during driving of the console. Detects tilting as well as both hard and soft obstacles. It comes as a small and compact plug-in unit and integrates easily with the LINAK. The DS1 is a small, compact plug-in adapter based on gyroscope technology, and it detects even a slight tilting of the console when the console is driving up or down. This system provides added protection to the PIEZO hardware based anti-collision technology that is built into the DL12 lifting columns.

5 year warranty

*Warranty covers replacement parts only, it does not cover onsite labour or freight costs.